CNC Drag Knife – 4.5mm Offset

$340.00

Disclaimer

This is a sharp cutting tool.  Safety first. By purchasing this product you agree to accept responsibility for proper or improper use and any damages incurred with use. Ensure your spindle does not turn on during cutting. To find out more about setting up toolpaths for drag knife applications, read the following article here – Vectric: Creating drag knife toolpaths

SKU: DK - 4.5mm Offset Category:
  • Highest quality build
  • Robust design: high strength AL body, large bearings.
  • Designed and built in Fort Worth, TX, USA

 

Cut thin materials with your CNC machine with this sturdy drag knife tool. Its unique one-piece body design makes it the strongest design available.  The body spins on two ball bearings about the shaft.  The blade point is offset from the shaft centreline, so it is “dragged” around to cut.

 

The drag knife is designed with an offset from the centreline.  Like a train caboose, when the machine moves, the blade follows and is “dragged” along behind.  This keeps the cutting edge of the blade pointed in the forward direction.  The amount of offset dictates how tight you can corner.  The smaller offset is better for smaller details, and the larger offset is going to be able to cut thicker.  Without added arcs at corners, you do not want to cut a corner with radius less than the offset of the tool (no sharp acute corners). Generally, you’ll want to cut through material that is not thicker than your offset.

Specifications

#19 or #24 heavy duty X-Acto (TM) blade.

Bearings rated for 140 kg radial load

Drag offset: 4.5mm

Blade is doweled in position for easy setup and no slippage

Hardened steel shank: 3/8″ diameter

Recommended max material thickness: equal to offset value

Min radius:  equal to offset value

Length from collet: 72mm

Shank Length: 39mm

Kit comes with 5 blades, storage tube and instructions.