CNC Drag Knife – Multi Offset

$499.00

Disclaimer

This is a sharp cutting tool.  Safety first. By purchasing this product you agree to accept responsibility for proper or improper use and any damages incurred with use. Ensure your spindle does not turn on during cutting. To find out more about setting up toolpaths for drag knife applications, read the following article here – Vectric: Creating drag knife toolpaths

SKU: DK - Multi Offset Category:
  • Highest quality build
  • Robust design: high strength AL body, large bearings.
  • Designed and built in Fort Worth, TX, USA
  • Drag knife comes with swappable heads for easy fixed offset ranges
  • Comes with 1/16″ (1.5mm), 1/8″ (3.2mm) and 1/4″ (6.4mm) offset head caps
  • Head caps machined with offset value and uniquely colour anodised for ease of use
  • Uses Excel No. 19 blade

 

Cut thin materials with your CNC machine with this sturdy drag knife tool. Its unique one-piece body design makes it the strongest design available.  The body spins on two ball bearings about the shaft.  The blade point is offset from the shaft centreline, so it is “dragged” around to cut.

The drag knife is designed with an offset from the centreline.  Like a train caboose, when the machine moves, the blade follows and is “dragged” along behind.  This keeps the cutting edge of the blade pointed in the forward direction.  The amount of offset dictates how tight you can corner.  The smaller offset is better for smaller details, and the larger offset is going to be able to cut thicker.  Without added arcs at corners, you do not want to cut a corner with radius less than the offset of the tool (no sharp acute corners). Generally, you’ll want to cut through material that is not thicker than your offset.

7075 AL.  M5 bolt with steel reinforced threads. Reinforcing the threads with a steel insert is standard industry practice to correct for this.  With this model, you can clamp the blade securely and it is designed to last.

Specifications

Features / Specifications:

Blades: Uses Excel No. 19 blade

Head Caps: 1/16″ (1.5mm), 1/8″ (3.2mm) and 1/4″ (6.4mm), head caps machined with offset value and uniquely colour anodised for ease of use

Body: Gray anodised 6061 Aluminum.  62.3mm long (not including blade stick out)

Bearings:  Dual 7/8” diameter ball bearings offer best balance between radial load capacity and minimal overall length

Shank: Hardened steel 8mm. 36.2mm length